Product ID:KP-10 TONER
MSDS Date:10/08/1990
FSC:6850
NIIN:00N040136
MSDS Number: BRQXM

NASHUA CORP

44 FRANKLIN ST
NASHUA, NH 03061
US

Emergency Phone: 603-880-5555

Info Phone: 800-258-1370

Preparer: R.L. SEVIGNY

Cage: 82784

NASHUA

NASHUA, NH 03061 US

Telephone: 603-880-2323

Cage: 82784

STYRENE, ACRYLATE (CO)POLYMER

CAS: 25213-39-2

Fraction By Weight: 50-60%

OSHA PEL NOT KNOWN

ACGIH TLV: NOT KNOWN

IRON (III) OXIDE; (MAGNETITE)

CAS: 1309-37-1

RTECS: NO7400000

Fraction By Weight: 30-40%

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3(FE),B2; 9293

PROPENE POLYMERS; (POLYOLEFIN)

CAS: 9003-07-4

RTECS: UD1842000

Fraction By Weight: 0-5%

OSHA PEL NOT KNOWN

ACGIH TLV: NOT KNOWN

TITANIUM OXIDE; (BLACK PIGMENT) PEL/TLV AS TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: < 1%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

SILICON DIOXIDE, AMORPHOUS; (AMORPHOUS SILICA GEL)

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: < 1%

OSHA PEL 80 MG/M3 (MFR)

ACGIH TLV: 10 MG/M3 (MFR)

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NO KNOWN HEALTH HAZARD WHEN USED AS
INTENDED IN A COPY MACHINE.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:IRRITATION OF EYES AND RESPIRATORY TRACT MAY
OCCUR IN HEAVY DUST CONDITIONS.
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid:INHAL: REMOVE FROM EXPOSURE. SKIN: WASH SKIN WITH SOAP. EYE:
FLUSH WITH WATER FOR AT LEAST 15 MIN. INGEST: DRINK WATER IF
INGESTED.

Extinguishing Media:WATER FOG, FOAM, DRY CHEMICAL, CO*2.
Fire Fighting Procedures:AVOID INHALATION OF SMOKE. WEAR NIOSH/MSHA
APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:MATERIAL CAN FORM EXPLOSIVE MIXTURES WHEN
SUSPENDED IN AIR. ALL IGNITION SOURCES SHOULD BE AVOIDED.

Spill Release Procedures:VACUUM OR SWEEP UP AS WITH ANY NON-TOXIC
POWDER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE NEXT TO STRONG OXIDIZERS.
EYE PROTECTION AND RESPIRATOR MAY BE REQUIRED FOR BULK HANDLING.
Other Precautions:AVOID EXCESSIVE EXPOSURE TO HEAT.

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST/MECHANICAL (GENERAL): NORMAL OFFICE
CONDITIONS.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE REQUIRED WHEN USED AS INTENDED.
Work Hygienic Practices:AVOID BREATHING DUST IF SAMPLE IS SPILLED.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Melt/Freeze Pt:M.P/F.P Text:160F,71C
Spec Gravity:1 (H*2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK POWDER, FAINT ODOR

Stability Indicator/Materials to Avoid:YES
NONE WITH COMMON MATERIALS WITH WHICH THE PRODUCT MAY REASONABLY COME
INTO CONTACT.
Stability Condition to Avoid:AVOID OPEN FLAME.
Hazardous Decomposition Products:TOXIC DECOMPOSITION PRODUCTS FORMED ON
COMBUSTION.

Waste Disposal Methods:DISPOSE ACCORDING TO FEDERAL, STATE AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.